Automatic Plastic Banding Machine

Categories

Related news

Automatic Plastic Strapping Machine

The automatic box strapping machine is for the final procedure of packaging, which is to bind the carton with a strapping tape to prevent it from being scattered during the handling process. There are many advantages to using the automatic strapping machine. packaging efficiency. At the same time reduce waste, but also save costs.

Read More »

Pp Packing Machine

The Hand Power PET PP Packing Belt Carton Wrapping Manual Strapping Machine is a plastic band combination packaging machine. It has a small overall footprint, is lightweight, has a strong lock and firmness, and is easy to use. The machine is made of high-strength alloys for the body and component parts, a highly reliable design and cutting-edge production technologies.

Read More »

green pet strap

Steel and polypropylene strapping are both weaker than King PET Strapping. Polyester strapping is 80% lighter and less costly than steel. Polyester straps are superior to and more expensive than polypropylene tape, whereas PET plastic tape for packing is very trustworthy.

Read More »

Contact Us

Automatic Plastic Banding Machine

The automatic plastic strapping machine is used for the forming and sealing of cartons. The maximum opening speed of the vertical opening mode of the machine can reach 12 boxes per minute. It is usually used in conjunction with the sealing machine, packing machine and other equipment to form an automatic packaging production line.

Product Description

Automatic Plastic Strapping Machine

The automatic plastic strapping machine is used for the forming and sealing of cartons. The maximum opening speed of the vertical opening mode of the machine can reach 12 boxes per minute. It is usually used in conjunction with the sealing machine, packing machine and other equipment to form an automatic packaging production line.

 

Automatic Plastic Banding Machine Specification

Electrical

1PH,110V/220V,50HZ60HZ

Power consumption

950W

Warm-up time

180s

Strap width

8-19mm(fix)

PP strap paper coil I.D

8″(200mm)

Tension adjustment

0-70kgs

Strapping speed

2.4s/pcs (25pcs/min)

Arch

aluminum arch

Arch size

W:850×H:600mm

Min. strapping size

W:100×H:30mm

Max. strapping size

W:850×H:585mm

Working table height

814mm

Machine dimension(L×W×H)

1420×633×1520mm

Wooden size (L×W×H)

Arch assembled 1476×689×1644mm

arch disassembled 1476×829×999

Machine weight

280kgs

 

Advantages of automatic plastic strapping machine 
This semi-automatic format offers a lot of flexibility and offers many advantages. For example, these strapping machines are mobile and very easy to operate. Fixed mounting is also possible, and if desired, you can choose a sliding bracket. It can also be assembled into a production line to increase productivity when you need to pack a lot of items.

 

Daily troubleshooting of automatic plastic banding  machine:
1, the power light is not on:
The reason is a, the power supply does not match, the socket or plug is loose,
The reason is b, the fuse is not installed or blown
Solution:
A, check the power supply and connection devices (reason A)
B, install or replace the fuse (reason B)

 

2. Power light on:
The reasons are: a, the storage box motor M3 works for more than 7 seconds (the PCB controller light does not light up)
B, PCB controller fuse is broken
C, the belts of the motors M1 and M2 are damaged, or the fixing screws of the pulleys are loose
Solution:
A, disconnect the power supply, reconnect (reason A)
B, replace the fuse (reason B)
C, replace the belt or fix the pulley (C reason)

 

Please refer to the above reasons to check the baler carefully and troubleshoot. If there are other complex problems, please contact our after-sales service for maintenance.

request a quote